-40%
Honeywell VISTA-15P Burglar Alarm Control Panel Kit, 8Zone,Motion,Keypad,Siren
$ 68.11
- Description
- Size Guide
Description
Included:1 Alarm Panel VISTA-15P
1 KEYPAD 6150
1 MOTION DETECTOR
1 WAVE2 SIREN
1 BATERRY
VISTA-15P
The versatile VISTA-15P is the ideal choice for any residential installation. VISTA-15P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, when used with an AlarmNet® Internet or LTE communicator, the VISTA-15P can be installed in premises without TELCO lines. Hardwired expansion, graphic keypad support, two-wire smoke detectors, scheduling options and a host of end-user and installer features separate the VISTA-15P from all other six-zone panels – offering you and your customers the most panel for the dollar.
IP alarm reporting and uploading/downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
Six on-board hardwired zones
– 16 hardwired expansion zones totalling 22
– 26 wireless expansion zones
Supports two graphic touchscreen keypads
Eight independent keyfob zones allow wireless keys to be programmed without using any of the 26 zones
Eight output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
Two low current on-board trigger outputs
50 Event Log viewable at system keypads with time/date stamp
32 system user codes
Two installer configurable zone types allows the installer to "create custom zone types" by assigning all zone attributes
Multiple actions on output devices depending on system “state”
– Turns light off when system arms
– Turns same lights on when system disarms
– Flashes same lights when system is in alarm
Built-in phone line cut monitor with programmable delay and annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
Supports four-wire and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal
Valuable End-User Features
Now viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log*
Auto keypad backlighting on entry
Keyswitch arming
Programmable macro buttons and single-button arming
A variety of wireless remote controlsfor single-button operation
User Scheduling
– Latchkey reports to pagers
– Auto arm/disarm
– “User access” time windows
Supports up to two numeric pagers
VIP Module allows system control from any touchtone phone
Chime by zone
Security Dealer Features
Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet Radio
*Requires custom alpha keypad