-40%

PowerStar Battery PS-625 ,replaces YB16-CLB 2 YEAR WARRANTY

$ 39.36

Availability: 50 in stock
  • Returns Accepted: Returns Accepted
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • California Prop 65 Warning: This Item Contains Harmful Lead valid via Prop 65
  • Condition: New
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    Banshee 30L-BS
    PowerStar PS-625
    Specs
    -
    260 CCA
    -  12v 19ah
    -  L =  6.89
    x  W = 3.89
    x  H = 6.10
    -  Weight
    = 14.05 lbs
    Description
    NO FILLING  -  MAINTENANCE FREE
    Batteries are shipped charged and ready to install. Our sealed motorcycle batteries feature Absorbed Glass Mat technology (AGM for  short). This design dramatically improves a battery's performance in the following areas:
    A) True sealed and maintenance-free design, you'll never have to check or add electrolyte again, unlike conventional batteries which require periodic fluid checks.
    B) Liquid-free AGM design, will not leak or corrode on expensive paint and chrome, and also eliminates corrosion around the battery terminals.
    C) AGM batteries have less internal resistance which allows them to produce more discharge current (cold cranking amperage) vs. comparable conventional "wet" batteries, and AGM batteries also recharge faster.
    D) Better resistance to both heat and vibration, a major cause of failure in conventional motorcycle batteries.
    E) Much slower self-discharge rate, (3% vs.15% per month) means longer periods between battery recharging over periods of non-use, like winter months or vacations.
    Additional Information
    PowerStar Battery General Features Sealed Construction
    PowerStar's unique construction and sealing technique ensure that no electrolyte leakage can occur from the terminals or case of any PowerStar battery. This feature insures safe, efficient operation of PowerStar's batteries in any position. PowerStar batteries are classified  as "Non-Spillable" and will meet all requirements of the International Air Transport Association.
    Absorptive Glass Mat System (AGM System)
    PowerStar batteries make use of fine mat separators (glass fiber) wherein sufficient electrolyte is absorbed to provide the longest life and steady service. This system prevents escape of electrolyte from the separator which causes leakage.
    Gas Recombination
    PowerStar batteries incorporated unique design that effectively controls generation of gas and allows recombination of over 90% of gas generated during the normal use.
    Maintenance-Free Operation
    During the expected floating service life of PowerStar batteries, there is no need to check the specific gravity of the electrolyte or add  water, which means they require no maintenance service.
    In fact, there is no provision for these maintenance functions.
    Position-Free and Leakage-Free
    The combination of the sealed construction and the use of absorptive mat separators permit operation off PowerStar batteries in any  position without loss of capacity, electrolyte and service life. PowerStar batteries are made to operate in any position.
    Stable Quality & High Reliability
    The PowerStar SLA battery has stable and reliable performance. It can be easily maintained to permit proper operation of the equipment that it powers. The battery can withstand overcharge, over discharge, vibration, and shock, and is capable of extended storage.
    Long Service Life, Float or Cyclic
    The PowerStar SLA battery has long life in float or cyclic service. The expected life of float service is shown on Figure10 and life of  cyclic service figure 11.
    Low Pressure  Venting System
    PowerStar batteries are equipped with a safe, low-pressure venting system which operates at 1psi to 6psi, designed to release excess gas and reseal automatically in the event that gas pressure rises to a level above the normal rate. Thus, there is no excessive build up of gas in the batteries. This low pressure venting system, coupled with the extraordinarily high recombination efficiency, make PowerStar batteries the safest sealed lead-acid  batteries available.
    Heavy-Duty Grids
    The heavy-duty lead calcium-alloy grids in PowerStar batteries provide an extra margin of performance and service life in both float and cyclic applications, even in conditions of deep discharge.
    Low Self Discharge
    Because of the use of Lead Calcium grids alloy, PowerStar SLA battery can be stored long periods of time without recharge.
    High Recovery Capability
    PowerStar batteries have an excellent charge acceptance and recovery capability even after deep discharge.
    U. L. Component Recognition
    AII of our PowerStar SLA batteries have already passed UL.